Tvlogic LVM-084 User Manual

tMulti-Format BroadcastLCD MonitorsOperation Manual_v1.1User’s ManualLVM-084

103. Press ENTER to select an item, make sure the item turns red and then change the set value.4. Select the desired new value with the UP/DOWN button

11Menu ContentsBelow is the description of each function of the menu.· BRIGHTThis item controls the degree of brightness between MAX(50) and MIN (-50)

12Compatible MARKER types are as follows:· CENTER MARKERThis item displays the CENTER MARKER on the screen. This function operates only after activati

13· REMOTE SETUPThis product is compatible with exterior REMOTE CONTROL. The user may access the remote setup menu from here.· SYSTEMYou can use the S

!Warning!!Other Functions1) ANALOG Mode Usage This product is capable of processing all input signals usable in ANALOG mode. The ANALOG input setti

152. Select COLOR among MENU and you will see below OSD MENU.3. On COLOR TEMP item, Press ENTER and select one of 5000K, 5600K, 6500K, 9300K and USER

165. COLOR COPY mode can be used only in USER MODE. If user wants to change only a specific value from standard mode, it will be a useful function. If

17Menu Classification Settable ValuesPIN 1~6NONE, ANALOG CHANNELDIGITAL A,B CHANNELTALLY R,G , BLUE ONLYSD 1:1 SCAN, UNDE

184) COMPUTER Mode This product supports VGA mode. If user wants this model to use Computer monitor, select this mode. This mode usage is as the follo

19· DOT PHASEUse this item for tuning the screen. Controls DOT PHASE value between MAX(31) and MIN(0). · H SHIFTUse this item to move the entire scre

02Warning· Always use set voltage. - DC 12V 1.5A· If liquid is spilled on or impacts this product, please disconnect the product immediately and s

20Additional Remarks1. LVM-084 added BACK LIGHT control item in main OSD.· BACK LIGHTThis item controls LCD Panel’s brightness. The value should be wi

21Product SpecificationsBelow is the product specifications Above specifications may be changed without notice.* VGA 1280 X 1024 mode is sub-sampling

22Optional AccessoriesRack Mount KitLVM-084

03FeaturesLVM Series units have the following features:Compatible with varied SDI signalsThe product is compatible with varied SDI Signals - 480i, 576

Name & Function of Each Part04<FRONT>VGA INCVBS1 / Y / G / S-YCVBS2 / Pb / BCVBS3 / Pr / R / S-CSDI INSDI OUTREMOTE COOLING FANFACTORY PGM

05<FRONT>· ANALOG INPUTUsed to select desired ANALOG INPUT. A Sub Menu for each analog input connected can be selected.· SDI INPUT SELECTUsed to

06· MENUUsed when OSD menu is activated.· DOWN/BRIGHTUsed to navigate menu during OSD menu activation. It may also be used to control the BRIGHT value

07<REAR>· REMOTE (RJ-45)Connection for remote control of monitor.· VGA IN / FACTORY PGMInput connection for VGA mode and input connector for FAC

08 InformationInput VIDEO connection methodWarning!!Before using this unit make certain to connect the power supply before connecting a signal to a

09Menu Organization & AdjustmentThe product may be controlled and set system-wide through an OSD. 1) Menu OrganizationBelow is the organization of